You have downloaded this file 0 times in the last 24 hours, limit is 100.
Your file downloads total 0 in the last 24 hours, limit is 20.

Static load capacity of the parallel loaded fillet welds.xls
 
This location is for Registered Users Only.
Perhaps you need to login or register.

Description:

KNOWN: Two statically loaded plates of known strength are fillet-welded together with specified weld geometry and weld strength.

FIND: Determine the static load capacity of the parallel loaded welds.

ASSUMPTIONS: 1) The plates themselves do not fail; shear failure occurs in the weld throat area.

Calculation Reference
Fundamentals Of Machine Component Design - Juvinall

Submitted By:
John Doyle (JohnDoyle[Admin])
Submitted On:
29 Jan 2008
File Size:
57.50Kb
Downloads:
436
File Version:
1.0
Rating:
Total Votes:3
Comments: 4
JohnDoyle[Admin] 2 years ago
It sounds like XLC has not installed properly. Can you try the following To install XLC download and run XLC_Ribbon_setup.exe. XLC works with Windows versions of Excel - 2007, 2010, 2013 & 2016 (both 32 bit and 64 bit versions are supported). It does not work on any Mac, web or reduced versions of Excel. Any installation problems please browse to the installation directory (usually ?C:\Program Files (x86)\XLC?) and open XLC.xlam directly. Also check that the XLC Add-In is activated Excel> File> Options> Add-Ins> Manage Excel Add-ins Go button. XLC.xlam must be in "Trusted Locations" Excel>Options>Trust Center then "Trust Center Settings ..." and select "Trusted Locations".
renders 2 years ago
Is there another way to enter the code? I do not have an XLC settings button under the blue (i) button.
jimbo 8 years ago
John, All sorted and up and running with full version. Your instructions are clear. Thanks for the effort.
saeid84 8 years ago
thanks

We have 417 guests and 2 members online

Contact Us
post/emailEmail (preferred method of contact)
telephone US +1 617 5008224
telephone EU +44 113 8152220
Our Feeds
Repository RSS. News RSS.