You have downloaded this file 0 times in the last 24 hours, limit is 100.
Your file downloads total 0 in the last 24 hours, limit is 20.

Concrete Box Culvert analysis and Design
This location is for Registered Users Only.
Perhaps you need to login or register.

Calculation Preview

A culvert is a structure that allows water to flow under a road, railroad, trail, or similar obstruction. Typically embedded so as to be surrounded by soil, a culvert may be made from a pipe, reinforced concrete or other material. A structure that carries water above land is known as an aqueduct.

02/11/2013 Added to the report page. version 1.1 

Calculation Reference
Tunnel Design

Submitted By:
Turan Babacan (BABACAN)
Submitted On:
02 Nov 2013
File Size:
240.05 Kb
File Version:
File Author:
Turan Babacan
Total Votes:29
Comments: 13
John84 4 days ago
How can l download the file from this site?
JohnDoyle[Admin] 9 months ago
Turan I have just downloaded the calculation and everything looks like it is in a strange font like 'wingdings'. Do I need to install a special font?
Capel 1 year ago

Same problem, fixed
Just change the cell manual
Capel 1 year ago
thanks a lot !

deolatkomo 2 years ago
Re:Concrete Box Culvert analysis and Design
Please I have problem identifying which country's code you used in your above ExcelCulvert design. In particular, what are the concrete MATERIAL properties indicated as: FC = 13MPa, FCTD =1.0MPa under the sheet named 'MAIN'? I think these should form part of DESIGN INFORMATION in your REPORT. For example, specify if design is to euro code,BS 8110, AASHTO, etc
JohnDoyle[Admin] 4 years ago
Regarding units we do [url=/frequently-asked-questions/excelcalcs-faqs/trouble-with-units?/]recommend a way of working to make this easy and offer some workarounds to assist conversion between units in our FAQ section[/url].
mwkkane 4 years ago
Was there a response to question # 5 above ? A version in English units .
asapengineering 4 years ago
I downloaded this spreadsheet which I understood would be in SI units. Within the worksheet, reference is made to Version 1.2 which is in American units, but I was unable to find that version posted on this site. Does this version exist, and is it possible to post it here? It would make like a lot easier if I do't have to convert all of my units.
nazrul.kabir 5 years ago
I have Technic font in my computer despite all writings are unreadable. I think this will be very helpful for my work.
JohnDoyle[Admin] 5 years ago
It is not the windings font but the Technic font. This font was already installed on my machine and I had no problems whatsoever but perhaps you should download the font, install it and reopen the calculation. Any of Turan's work is well worth persevering with.
rdivito 5 years ago
Downloaded file text is in Wingdings font type and is unreadable.
BABACAN 5 years ago
Added to the report page.
JohnDoyle[Admin] 5 years ago
Is there no end to your talent Turan? Another spreadsheet that blows my socks off!

We have 248 guests and 7 members online

Contact Us
post/emailEmail (preferred method of contact)
telephone US +1 617 5008224
telephone EU +44 113 8152220
Our Feeds
Repository RSS. Forum RSS. User Comment RSS. News RSS.