Bolt Spacing and Edge Distances

(4/8)

Description

Bolt Spacing, Edge and End Distances for Steel Plates

Gives the minimum and maximum bolt pitch, edge distance and end distance for a bolted steel plate connection from the bolt diameter, hole size, thickness of the thinner ply and the design strength of the plate.

Method

Detailing rules from the Steel Designers’ Manual (the same rules as BS 5950-1):

  • Minimum pitch 2.5d
  • Minimum edge distance 1.4D for a sheared or hand flame-cut edge, 1.25D for a rolled, sawn, planed or machine flame-cut edge
  • Minimum end distance 1.4D
  • Maximum pitch in the direction of stress 14t
  • Maximum edge and end distance 11tε, where ε = √(275/py)

Inputs

  • Bolt diameter d and hole diameter D (mm)
  • Thickness t of the thinner ply (mm)
  • Design strength py of the plate (MPa)

Outputs

  • Minimum pitch, minimum edge distance for both edge types and minimum end distance
  • Maximum pitch and maximum edge and end distances

The stored example, an M8 bolt in a 9 mm hole through 8 mm S355 plate (py = 355 MPa), gives a minimum pitch of 20 mm, minimum edge distances of 12.6 mm and 11.25 mm, a minimum end distance of 12.6 mm, a maximum pitch of 112 mm and maximum edge and end distances of 77.5 mm.

Please note

  • The minimum end distance is always 1.4D; for rolled, sawn or machined ends 1.25D is normally permitted, so this result is on the safe side.
  • These are detailing limits only; bolt and plate strengths (shear, bearing, block tearing) are not checked, and other codes, such as Eurocode 3, use different rules.
  • The design strength py is entered by hand; it is not reduced automatically for thicker plate.
  • Uses functions from the free XLC add-in; without it the maximum edge and end distances show #NAME?. No macros.

Calculation reference: Steel Designers’ Manual.

Calculation Preview

19 Jul 2023
File Size 52.00 Kb
Downloads: 1212
File Version: 1.0
File Rating (4/8)

 
Full download access to any calculation is available to users with a paid or awarded subscription (XLC Pro).
Subscriptions are free to contributors to the site, alternatively they can be purchased.
Click here for information on subscriptions.
Be the first to comment! Please sign in or register.