IBC 2006 Seismic Calc.xls
Description
IBC 2006 / ASCE 7-05 Seismic Base Shear and Force Distribution
Three sheets for the Equivalent Lateral Force procedure of IBC 2006 and ASCE 7-05: the seismic base shear coefficient, its vertical distribution (with diaphragm forces) over up to ten levels, and the distribution of a storey shear to the elements of a rigid diaphragm, including torsion.
Method
- Seismic Base Shear – Fa and Fv interpolated from IBC tables; SDS, SD1; Seismic Design Category; period from analysis (capped at CuTa) or Cthnx; Cs from Equations 12.8-2 to 12.8-6
- Seismic Vert Dist – Fx = CvxV with Cvx = wxhxk/Σwihik, storey shears and overturning moments, and diaphragm forces Fpx within the 0.2 and 0.4SDSIEwpx limits (Section 12.10.1.1)
- Seismic Rigid Horiz Dist – centre of rigidity of up to 20 elements each way, 5% accidental eccentricity, amplification Ax, and direct plus torsional shears
Inputs
- Occupancy category, R, hn, SS, S1, site class, structure type, period method, TL
- Level heights and weights; element stiffnesses and locations
The stored example (Occupancy II, site class B, SS = 0.88, S1 = 0.44, R = 3.5, hn = 50 ft) gives SDS = 0.587, SD1 = 0.293, SDC D, Ta = 0.376 s and Cs = 0.168, so V = 0.168W. The other two sheets are left blank.
Please note
- The base shear sheet gives the coefficient Cs; multiply by the seismic weight W yourself. The sheets are not linked, so V, SDS and the period must be re-entered.
- The minimum Cs is 0.01 (original ASCE 7-05 Equation 12.8-5); Supplement 2 later changed this to 0.044SDSIE ≥ 0.01.
- Empty tables show #DIV/0!. The USGS address on the sheet is out of date. No macros.
Calculation reference: 2006 International Building Code (with ASCE 7-05).
Calculation Preview
Full download access to any calculation is available to users with a paid or awarded subscription (XLC Pro).
Subscriptions are free to contributors to the site, alternatively they can be purchased.
Click here for information on subscriptions.
Comments: 1
×
WilfredL
17 years ago
Thanks.