PLATECAP.xls

(5/6)

Description

Axial Load Capacity Tables for Single Plates (AISC ASD)

Produces two quick-reference tables of allowable axial load for single steel plates: gross tension capacity and compression (buckling) capacity, for twelve plate heights and ten plate thicknesses. Typical uses are a quick check of beam shear tabs and bracing gusset plates.

Method

AISC 9th Edition Allowable Stress Design (1989), with the load assumed uniform over the gross section Ap = Hptp.

  • Tension: Rt = 0.60FyAp
  • Compression: r = tp/√12 about the plate’s minor axis, slenderness KLc/r, Cc = √(2π²E/Fy) with E = 29,000 ksi, then the AISC inelastic formula (KL/r ≤ Cc) or the elastic formula 12π²E/(23(KL/r)²) to give Fa, and Rc = FaAp

Inputs

  • Yield stress Fy (ksi)
  • Unbraced length for buckling Lc (in.) and effective length factor K
  • The plate heights and thicknesses heading each table, which can be overwritten to make custom tables

Outputs

  • Table of gross tension capacities (kips)
  • Table of compression capacities (kips)

The stored example (Fy = 36 ksi, Lc = 12 in., K = 1.2) gives, for a 12 in. × 0.5 in. plate, 129.6 kips in tension and 78.0 kips in compression; a 3 in. × 0.375 in. plate gives 24.3 kips and 9.49 kips (KL/r = 133, beyond Cc = 126, so elastic buckling governs).

Please note

  • Allowable (ASD) values on the gross section only: net-section rupture, block shear, bolt bearing and plate-edge local effects are not checked.
  • No limit is applied to the slenderness ratio, so very thin plates with long unbraced lengths still return a capacity.
  • US customary units only. A cell comment explains the Whitmore section for gusset plates.
  • No macros. Sheets are protected without a password and the formulas are hidden.
  • Written by Alex Tomanovich, P.E. Reference: AISC Manual of Steel Construction, 9th Edition, Allowable Stress Design (1989).

Calculation Preview

19 Oct 2016
File Size 48.50 Kb
Downloads: 718
File Version: 1.3
File Author: Alex Tomanovich
File Rating (5/6)

 
Full download access to any calculation is available to users with a paid or awarded subscription (XLC Pro).
Subscriptions are free to contributors to the site, alternatively they can be purchased.
Click here for information on subscriptions.
Comments: 1
atomanovich 10 years ago
Latest Version