You have downloaded this file 0 times in the last 24 hours, limit is 100.
Your file downloads total 0 in the last 24 hours, limit is 20.
Dimensional Tolerances ISO 286-2
This location is for Registered Users Only.
Perhaps you need to login or register.
Purpose of calculation
Calculate upper and lower limits for shafts and holes (bores).
5 selections have been checked manually.
Calculation Units - mm
Fit Preferred All Description Use Clearance H11/c11, C11/h11 H11/a11, H11/c11, H11/c9, H11/d11, A11/h11, C11/h11, D11/h11 Fits with great clearances with parts having great tolerances. Pivots, latches, fits of parts exposed to corrosive effects, contamination with dust and thermal or mechanical deformations. Clearance H9/d9, D10/h9 H9/C9, H9/d10, H9/d9, H8/d9, H8/d8, D10/h9, D9/h9, D9/h8 Running fits with greater clearances without any special requirements for accuracy of guiding shafts. Multiple fits of shafts of production and piston machines, parts rotating very rarely or only swinging. Clearance H9/e9, H8/e8, E9/h9 H9/e9, H8/e8, H7/e7, E9/h9, E8/h8, E8/h7 Running fits with greater clearances without any special requirements for fit accuracy. Fits of long shafts, e.g. in agricultural machines, bearings of pumps, fans and piston machines. Clearance H8/f7, H7/f7, F8/h6 H9/f8, H8/f8, H8/f7, H7/f7, F8/h7, F8/h6 Running fits with smaller clearances with general requirements for fit accuracy. Main fits of machine tools. General fits of shafts, regulator bearings, machine tool spindles, sliding rods. Clearance H7/g6, G7/h6 H8/g7, H7/g6, G7/h6 Running fits with very small clearances for accurate guiding of shafts. Without any noticeable clearance after assembly. Parts of machine tools, sliding gears and clutch disks, crankshaft journals, pistons of hydraulic machines, rods sliding in bearings, grinding machine spindles. Clearance None H11/h11, H11/h9 Slipping fits of parts with great tolerances. The parts can easily be slid one into the other and turn. Easily demountable parts, distance rings, parts of machines fixed to shafts using pins, bolts, rivets or welds. Clearance H7/h6 H8/h9, H8/h8, H8/h7, H7/h6 Sliding fits with very small clearances for precise guiding and centring of parts. Mounting by sliding on without use of any great force, after lubrication the parts can be turned and slid by hand. Precise guiding of machines and preparations, exchangeable wheels, roller guides. Transition H7/j6 H8/j7, H7/js6, H7/j6, J7/h6 Tight fits with small clearances or negligible interference. The parts can be assembled or disassembled manually. Easily dismountable fits of hubs of gears, pulleys and bushings, retaining rings, frequently removed bearing bushings. Transition H7/k6, K7/h6 H8/k7, H7/k6, K8/h7, K7/h6 Similar fits with small clearances or small interferences. The parts can be assembled or disassembled without great force using a rubber mallet. Demountable fits of hubs of gears and pulleys, manual wheels, clutches, brake disks. Transition H7/n6, N7/h6 H8/p7, H8/m7, H8/n7, H7/m6, H7/n6, M8/h6, N8/h7, N7/h6 Fixed fits with negligible clearances or small interferences. Mounting of fits using pressing and light force. Fixed plugs, driven bushings, armatures of electric motors on shafts, gear rims, flushed bolts. Interference H7/p6, H7/r6, P7/h6 H8/r7, H7/p6, H7/r6, P7/h6, R7/h6 Pressed fits with guaranteed interference. Assembly of the parts can be carried out using cold pressing. Hubs of clutch disks, bearing bushings. Interference H7/s6, S7/h6 H8/s7, H8/t7, H7/s6, H7/t6, S7/h6, T7/h6 Pressed fits with medium interference. Assembly of parts using hot pressing. Assembly using cold pressing only with use of large forces. Permanent coupling of gears with shafts, bearing bushings. Interference None H8/u8, H8/u7, H8/x8, H7/u6, U8/h7, U7/h6 Pressed fits with big interferences. Assembly using pressing and great forces under different temperatures of the parts. permanent couplings of gears with shafts, flanges.
ISO 286-2 Tolerances for Shafts & Holes
- Submitted By:
- John Doyle (JohnDoyle[Admin])
- Submitted On:
- 22 Dec 2011
- File Size:
- 129.50 Kb
- File Version:
- File Author:
- John Doyle
Be the first to comment! Please sign in or register.