You have downloaded this file 0 times in the last 24 hours, limit is 100.
Your file downloads total 0 in the last 24 hours, limit is 20.

Thermal Effects for Buildings
 
This location is for Registered Users Only.
Perhaps you need to login or register.

Description:

"THERMAL" --- THERMAL EFFECTS FOR STEEL BUILDING OR STRUCTURE

Program Description: "THERMAL" is a spreadsheet program written in MS-Excel for the purpose of considering the thermal effects for a steel building or structure.  Specifically, the appropriate maximum design temperature change, the change of length or stress as applicable, and the maximum building or structure length either without or between expansion joints is determined.  There is also a "General Thermal Effects Calculator" which can be used to selectively determine any of the analysis parameters, as well as a temperature converter which can be used to convert from °C (Celsius) to °F (Fahrenheit).

This program is a workbook consisting of three (3) worksheets, described as follows:

Documentation sheet
Thermal Effects - Thermal Effects for Steel Building or Structure
General Thermal Effects Calc. - General Thermal Effects Calculator for Various Analysis Parameters


Program Assumptions and Limitations:


1.  This program is based on the following references:

A."Expansion Joints in Buildings" - Technical Report No. 65 by: Federal Construction Council for National Academy of Sciences, 1974
B.Steel Construction Manual - 13th Edition (pages 2-31 to 2-33 and page 17-23) by: American Instritute of Steel Construction (AISC), 2005
C."Expansion Joints: Where, When and How" by: James M Fisher, S.E. - published in Modern Steel Construction Magazine, April 2005

2.  This program uses the recommendations from Section II.A of Reference A (from above) to determine the appropriate maximum design temperature change, DT, expressed in oF.  This value may then be utilized in either a 2-D or 3-D computer analysis model to determine the overall effects of the temperature change on the building or structure.

3.  This program uses the criteria from Section II.B.1.a of Reference A (from above) to determine the need for building or structure expansion joints.

Calculation Reference
Steel Construction Manual
Expansion Joints: Where, When and How by Fisher
Federal Construction Council for National Academy of Sciences

Submitted By:
Alex Tomanovich (ATomanovich)
Submitted On:
20 Jul 2010
File Size:
82.50 Kb
Downloads:
130
File Version:
1.0
Rating:
Total Votes:2
Comments: 2
timmythetank 9 years ago
I also think this spreadsheet needs to give the reduce due to L,T or U shape buildings which in my opinion is 50%.
timmythetank 9 years ago
I am not sure the spread sheet correctly reflects the "Expansion Joints in Buildings: Technical Report
No. 65' Article. The percentages are added together applied as a total percentage, i.e. R2=-33%,R4=-25% is 1+(-.33+-.25). Giving 42%, however I think it should be (1-.33)*(1-.25)=50%. I think the percentages should be in-depended not additive.

We have 255 guests and no members online

Contact Us
post/emailEmail (preferred method of contact)
telephone US +1 617 5008224
telephone EU +44 113 8152220
Our Feeds
Repository RSS. News RSS.