You have downloaded this file 0 times in the last 24 hours, limit is 100.
Your file downloads total 0 in the last 24 hours, limit is 20.

NDS Table A.4-2A Nominal Shear Capacity Rev 0 wns 030210.xls
This location is for Registered Users Only.
Perhaps you need to login or register.


This sheet calculates the ASD or LRFD share capacities for blocked plywood diaphragms per NDS/SDPWS.

1. Nominal unit shear capacities shall be adjusted in accordance with 4.2.3 to determine ASD allowable unit shear capacity and LRFD factored unit resistance. For general construction requirements see 4.2.6. For specific requirements, see for wood structural panel diaphragms.

2. For framing grades other than Douglas Fir-Larch or Southern Pine, reduced nominal unit shear capacities shall be determined by multiplying the tabulated nominal unit shear capacity by the Specific Gravity Adjustment Factor= [1-(0.5 - G)], where G = Specific Gravity of the framing lumber from the NDS. The Specific Gravity Adjustment Factor shall not be greater than 1.

3. Apparent shear stiffness values, G.. are based on nail slip in framing with moisture content less than or equal to 19% at time of fabrication and panel stiffness values for diaphragms constructed with OSB panels. When plywood panels are used, G. values shall be determined in accordance with Appendix A.

4. Where moisture content of the framing is greater than 19% at time of fabrication, G. values shall be multiplied by 0.5.

Calculation Reference
ASD LRFD Wood Design


Submitted By:
Bill Scott (wnscott50)
Submitted On:
03 Mar 2010
File Size:
186.50 Kb
File Version:
File Author:
Bill Scott
Total Votes:1
Be the first to comment! Please sign in or register.

We have 248 guests and 5 members online

Contact Us
post/emailEmail (preferred method of contact)
telephone US +1 617 5008224
telephone EU +44 113 8152220
Our Feeds
Repository RSS. News RSS.