ASCE798S | - ASCE 7-98 Code Snow Loading Analysis | |

ASCE702S | - ASCE 7-02 Code Snow Loading Analysis | |

ASCE798W | - ASCE 7-98 Code Wind Analysis | |

ASCE702W | - ASCE 7-02 Code Wind Analysis | |

BASEPLT9 | - Base Plate Analysis per AISC 9th Ed. (ASD) | |

BEAMANAL | - Single-Span and Continuous-Span Beam Analysis | |

BEAMCOL9 | - Steel Beam/Column Analysis/Code Check (ASD) | |

BEAMTAB | - Beam End Connection Using Beam Tab per AISC 9th Ed. (ASD) | |

BMREACT | - Beam Allowable End Reaction and End Moment Analysis | |

BMREINF9 | - Steel Beam Reinforcement Analysis/Code Check (ASD) | |

BOEF | - Beam on Elastic Foundation Analysis | |

BOLTGRP | - Bolt Group and Bolt Stress Analysis per AISC 9th Ed. (ASD) | |

CLIPCONN | - Beam End Connection Using Clip Angles per AISC 9th Ed. (ASD) | |

ClipConnTable | - Beam Connection Table – Clip Angles Welded or Bolted to Beam | |

CONVCALC | - Conversion Calculator for “ft-in-fraction” and Metric Arithmetic | |

IBC2003E | - IBC 2003 Code Seismic Analysis | |

IBC2000E | - IBC 2000 Code Seismic Analysis | |

PLATECAP | - Axial Load Capacities for Single Plates | |

RECTBEAM | - Rectangular Concrete Beam Analysis/Design per ACI 318-99 | |

PRYING9 | - Prying Action Analysis per AISC 9th Ed. (ASD) | |

SIMEQN | - Simultaneous Equation Solver for up to 10x10 Equations/Unknowns | |

FOOTINGS | - Rectangular Spread Foundation Analysis | |

XBRACING | - Analysis of Vertical Bents with Tension-only X-bracing | |

FRAME | - Portal and Gable Rigid Plane Frame Analysis (stiffness matrix method) | |

INTERPOL | - Routine for Linear Interpolation between Values in a Table | |

SECTPROP | - Section Properties and General Stress Analysis Program | |

WELDGRP | - Weld Group Analysis per AISC 9th Ed. (ASD) | |

GRDSLAB | - Concrete Slab on Grade Analysis for Post and Wheel Loading | |

JOIST | - Steel Joist Analysis | |

PILEGRP | - Pile Group Analysis | |

POLYNOM | - Roots Solver for Quadratic, Cubic, and Quadratic Equations | |

FLRPLATE | - Steel Checkered Floor Plate Design (ASD) | |

STIFFENER | - Steel Beam Stiffener Analysis for Concentrated Loads (ASD) | |

WEIGHTS | - Pipe Weight and Tank Volume and Weight Calculator | |

PONDING9 | - Ponding Analysis per AISC 9th Ed. (ASD) | |

REBARS | - Reinforcing Bar Development and Splice Lengths per ACI 318-99 | - |

POLEFDN | - Pole Foundation Analysis | |

TRIANGLE | - Triangle Solutions | |

Loan Amortization | - Loan Amortization | |

AISCProp13.0 | - AISC 13th Edition member properties in tabular form | |

BRGPLT9 | - analysis of beam bearing plates per AISC 9th Edition (ASD) | |

MOVLOADS | - Analysis of simple-span members subjected to from 1 to 8 moving wheel loads. | |

MONORAIL | - Analysis of beam end connections using a tab plate per AISC 9th Edition (ASD) | |

ENDPLMC9 | - Analysis and design of 4-tension bolt and 8-tension bolt moment connections | |

DECKSLAB | - Analysis and design of slabs on metal deck | |

AISCPROP and AISCPROP13 | - AISC Member Database (from AISC CD Database, 2001) | |

AISC Properties Viewer and AISC 13.0 Properties Viewer | - AISC Member Dimensions and Section Properties Viewer |

You'll be interested to know that Alex sells software for Structural Engineers that runs on HP Handheld calculators (HP50g, HP49G and HP49g). Click for further Details.

I tracked Alex down to thank him for his wonderful work and goodwill. Alex told me "*I immigrated from Europe (Yugoslavia) to the U.S. in
1952, when I was 3 years old. I became a naturalized citizen after 7
years, and I grew up for the most part in Indianapolis, Indiana. I
graduated from Rose-Hulman Institute in Terre Haute, Indiana in 1971
with a BSCE degree with a structural major. I'm 58 years old and been a
practicing structural engineer for 36 years. My experience is primarily
in heavy industry and manufacturing. I'm a registered PE in 8 states.
As far as any past accomplishments worthy of note, many years ago, I
developed several PE exam problems which were accepted into the pool of
potential NCEE exam problems, highlighted by 5 of them appearing on the
April, 1977 NCEE PE exam. Also, I had developed 3 structural
engineering plug-in software cards for the HP48 handheld
calculator/computer system, which were marketed nationally for me from
1993-2002. Like most, I'm self taught in MS-Excel, and have been
programming in it since 2000, porting over many of the works that I had
done on the HP48. My hobbies are bass fishing, exercise, watching
sports and movies, music, customizing / driving my 2005 Chevrolet SSR
convertible pickup truck, and last but not least.....programming.*"

**Attention Structural Engineers with HP Calculators **

ExcelCalcs author Alex Tomanovich develops software for HP hand held calculators if his software is as good as his spreadsheets they will be essential items to all Structural Engineers. Alex writes:

In the past I developed 3 structural engineering software plug-in cards for use in the HP48GX scientific handheld calculator. These 3 software cards were originally marketed for me by Surveyors’ Module Inc. (SMI), and later by Eagle Point Software. These cards were marketed from 1993 – 2002, which basically paralleled the life of the HP48GX calculator.

I have just recently completed porting over all of the libraries found on the 3 cards mentioned above, as well as several other useful structural engineering programs and utilities that I developed for use on the new HP50g scientific calculator. Please note that all these programs will also work in the HP49G and HP49g+ calculators as well.

I am now offering all of these programs for a package price of $125.00. What you will receive is a CD containing 44 structural engineering program libraries, and 6 miscellaneous libraries pertaining to math related utilities, hydraulics, and financial programs. On this CD you will also receive PDF file copies of my 3 original structural engineering software card manuals, as well as MS-Word or text file format documentation for all of the other libraries found on the CD. (PLEASE NOTE that the attached photos are of the original software manuals that I developed for the HP48 system, and are shown for reference only. You will NOT receive hard copies of the manuals, just the electronic PDF file copies on CD.) I will also include a custom menu (CST) variable on the CD to be loaded in the HOME directory of your calculator which will facilitate in accessing and running all of these programs.

Plus as a BONUS, on the CD I will include a copy of the public domain EMU48 emulator software of the HP48GX calculator for the PC, in which I have installed all 50 of these programs in a 2mb electronic memory card in the emulator itself. I have included an easy installation instruction file, which will help you get the emulator installed. Once installed, you will be able to access and run all 50 of these programs on your PC as well as your handheld.

Again, that’s 50 programs to run on both your handheld and your PC for $125.00…..$2.50 per program!

NOTE: you MUST have a PC/HP calculator interface cable to download all these files to the HP calculator. However, in the case of either the HP50g or the HP49g+, you may use an SD plug-in memory card instead to transfer all the files from the PC to the calculator.

The following is a listing and description of the program libraries including in this package:

__Structural Engineering and Miscellaneous Programs for HP49G/HP49g+/HP50g Calculators:__Name | Library | Description | |

1 | STEELDES | 1500 | Structural steel design equation library |

2 | CONCDES | 1501 | Reinforced concrete design equation library |

3 | STRUCTRL | 1502 | General structural analysis equation library |

4 | BEAMCOL9 | 1503 | AISC 9th (ASD) Edition beam and column analysis |

5 | BASEPLT9 | 1504 | AISC 9th (ASD) Edition column base plate analysis |

6 | AISCPROP | 1505 | AISC 9th Edition shapes database |

7 | BEAMANAL | 1506 | Single-span beam analysis |

8 | FOOTINGS | 1507 | Spread foundation analysis |

9 | RETWALLS | 1508 | Cantilever retaining wall analysis |

10 | PILEGRP | 1509 | Pile group analysis (elastic method) |

11 | RECTBEAM | 1510 | Rectangular reinforced concrete beam (ACI 318-99) |

12 | RECTCOL | 1511 | Rectangular reinforced concrete column (ACI 318-99) |

13 | SECTPROP | 1512 | Section properties analysis |

14 | CONTBEAM | 1513 | Continuous-span beam analysis (up to 10 spans) |

15 | BOLTGRP | 1514 | Bolt group analysis (elastic method) |

16 | WELDGRP | 1515 | Weld group analysis (elastic method) |

17 | SHTPILE | 1516 | Sheet piling wall analysis (cantilevered/anchored) |

18 | ROUNDCOL | 1517 | Round reinforced concrete column (ACI 318-99) |

19 | STEELDAT | 1518 | Structural steel data and tables (ASD) |

20 | REBARS | 1519 | Reinforcing bars data and tables (ACI-318-99) |

21 | CONV | 1520 | Conversion utilities |

22 | XBRACING | 1521 | Tension-only x-braced bent analysis |

23 | CORBELS | 1522 | Reinforced concrete corbels and brackets |

24 | STEPCOL | 1523 | Step column effective length analysis |

25 | BOLTS | 1524 | Bolt combined stress per AISC 9th Ed. (ASD) |

26 | MOMBASES | 1525 | Moment base analysis |

27 | COMPDES9 | 1526 | Composite design per AISC 9th Ed. (ASD) |

28 | MOVLOADS | 1527 | Moving loads analysis |

29 | BOXFRAME | 1528 | Box frame analysis by moment distribution |

30 | COVPLCOL | 1529 | Cover plated WF column properties |

31 | BOEF | 1530 | Beam on elastic foundation analysis |

32 | BEAMWT | 1531 | WF beam with WT shape reinforcing (ASD) |

33 | ENDPLTMC | 1532 | 4-tension bolt end plate moment connections (ASD) |

34 | DYNFDN | 1533 | Dynamic analysis of vibrating equip. foundations |

35 | HPRESS | 1534 | Horizontal wall pressures from point/line loads |

36 | MASONRY | 1535 | Reinforced masonry analysis (beam and wall) |

37 | ASCEWIND | 1536 | ASCE 7-98 wind loading for low-rise buildings |

38 | XBRACE | 1537 | Indeterminate x-braced bent analysis (tens./comp.) |

39 | POLEFDN | 1538 | Pole foundation analysis for rigid free-top piers |

40 | CSOG | 1539 | Concrete slab on grade analysis (unreinforced) |

41 | KFACTOR | 1540 | Effective length factors for steel columns |

42 | BRACE | 1495 | Single diagonal brace (length and forces) |

43 | SECTIONS | 1498 | Section properties equation library |

44 | AISC7TH | 1499 | AISC 7th Edition shapes (not in AISC 9th Edition) |

45 | TRIANGLE | 1307 | General and right triangle solutions |

46 | SIMEQN | 1309 | Simultaneous equations solver |

47 | LINT | 1187 | Linear interpolation |

48 | HYDRA | 1011 | Hydraulics equation library (Manning formula) |

49 | TVM | 1270 | Time value of money/amortization equation lib. |

50 | TVM50G | 1271 | Time value of money/amortization (uses built-in TVM) |

__Notes:__ 1. Libraries 1500-1502 (items 1 - 3) make up the original Structural Engineering Equation Card (SEEC)

2. Libraries 1503-1511 (items 4 - 12) make up the original Structural Engineering Program Card (SEPC)

3. Libraries 1512-1520 (items 13 - 21) make up the original Structural Engineering Program Card 2 (SEPC2)

4. All of the above libraries may be loaded into the HP49G calculator emulator to run on the PC. The HP49G

emulator is available combined with an HP48GX emulator and an HP49G editor in a product called,

**HPUserEdit 4**, which is available as a download from the website www.hpcalc.org.

Methods of Payment Accepted:

- Personal Check (drawn on USA banks only)
- Cashier’s Check or Money Order
- PayPal.

Contact Alex Tomanovich, P.E. for ordering details.

**Buy a HP Calculator from Amazon**

HP50G Calculator

| Find on Amazon.com | Find on Amazon.co.uk | Find on Amazon.fr | Find on Amazon.de | Find on Amazon.ca |

HP49G Calculator

| Find on Amazon.com | Find on Amazon.co.uk | Find on Amazon.fr | Find on Amazon.de | Find on Amazon.ca |

HP48G Calculator

| Find on Amazon.com | Find on Amazon.co.uk | Find on Amazon.fr | Find on Amazon.de | Find on Amazon.ca |

Dr Shaiq Khan is a Chartered Structural Engineer working freelance in the building trade. In his day to day work, he develops and uses spreadsheets for the design and maintenance of buildings. This enables him to enhance the quality of work for his clients. He is generous enough to share his technical expertise with fellow professionals. More details at his website.

Shaiq's Calculations