Footing Bending Stress The Structural Designers Foundation Manual provides guidelines for calculating bending stress in footings, which are critic...

Material Properties and Dimensions: These are the basic inputs required for the calculations, including the weights of concrete and soil, dimen...

\

The 'Code of Practice for Structural Use of Concrete 2013' is a design manual provided by the Buildings Department of the Hong Kong Government. It ...

Includes details for bolting clearances for below list :OPEN JAW WRENCHESSINGLE ENDED OPEN JAW SLUGGING WRENCHESSOCKET WR...

Seimic Response of Liquid Storage Tank

This calculation pertains to the structural analysis of a specific bridge component—Bridge 1 - Crossing 1&mda...

IS 456:2000 is a code of practice published by the Bureau of Indian Standards (BIS) for the design and constructi...

a comprehenisve list of all Europeon Steel section Data taken from Dlubal (website https://www.dlubal.com/en/cross-section-properties). Documented ...

This is for infiltration testing requirements for Riverside County (California). A percolation test (colloquially called a perc test)...

Storm water drainage calculation

Stormwater calculations are essential for designing and managing stormwater systems, which are responsibl...

RC design based on EN 1992

sHEAR END PLATE DESIGN AS PER EN 1993-1-8

EN 1991-1-8, part of the Eurocode suite of standards, provides guidelines for designing steel st...

Roof Purlin design to S EN 1993. Excel file on design of a metal purlin for roof either metal decking or clay tile roof. The design spreadsheet all...

Roof live load calculations in ASCE 7-10 Section 4.8.2:The roof live load is calculated using Equation 4.8-1:Lr = Lo R1 R2 Where:Lr ...

Design of Anchorage Bolt at Truss Support to BS En 1993. Spreadsheet to check and input of MS anchorage bolt at the end of a truss. The input value...

BCIS stands for Building Cost Information Service. It’s a service provided by the Royal Institution of Chartered Surveyors (RICS) that offe...

The purlin design principles specifically according to BS 5950 (British Standard for Structural Use of Steelwork in Building):

Load Combinations...

Quick PGA calculator based on NZTA Bridge manual. with extracts From BM and ASNZ 1170.0.

Design of magnum stone retaining wall