You have downloaded this file 0 times in the last 24 hours, limit is 100.
Your file downloads total 0 in the last 24 hours, limit is 20.

Thread Stripping.xls
 
This location is for Registered Users Only.
Perhaps you need to login or register.

Description:
The size of a screwed fastener is first established by calculating the tensile load to be withstood by the screw and selecting a suitable screw to withstand the tensile load with the appropriate factor of safety or preload. If the joint is fixed using a nut and bolt then assuming the nut is selected from the same grade as the bolt there is little need to size the nut. The fastener manufacture sizes the length of the nut to ensure the screw will fail before the nut. If the screw fastens into a tapped hole then a check of the depth of thread engagement is required.

Calculation Reference
Fundamentals Of Machine Component Design - Juvinall
Machinery's Handbook
Mechanical Engineers' Handbook
Schaum's Outline - Machine Design

Submitted By:
John Doyle (JohnDoyle[Admin])
Submitted On:
22 Nov 2009
File Size:
94.00 Kb
Downloads:
703
License:
File Version:
01
Rating:
Total Votes:6
Comments: 1
kk75kk 8 years ago
nice one friedns.thanks

We have 349 guests and 2 members online

Contact Us
post/emailEmail (preferred method of contact)
telephone US +1 617 5008224
telephone EU +44 113 8152220
Our Feeds
Repository RSS. News RSS.