Bolts and Threads
0 ContainersFiles in Bolts and Threads
Bolt spacing and edge distances.xls
The minimum and maximum fastener spacing, end distances, and edge distances for steel plates are t...
BoltedJoint.xls
To determine the force distribution in a preloaded bolted joint, you can follow these steps:
Understand the Joint Configuration...
Quick and Dirty Bolt Sizing Calculation.xls
https://www.youtube.com/watch?v=x5G5xPAt5To
The following values are required as inputs to the calculation:
- BOLT GRADE - Enter the two num...
Power Screw.xls
Purpose of calculation: For an applied load on a screw thread calculate the axial thrust of a nut. Calculate bolt pretension from screw parameter...
Power screw calculations.xls
KNOWN: A double thread Acme screw and a thrust collar, each with known diameter and running friction coefficient, are used to raise a speci...
Capacities of Bolts and Welds to BS449: Part 2
BS 449: Part 2 is a British standard that provides guidelines for the structural use of steel. It includes specifications for the capacities of...
Bolt torque/tension calc
The Bolt Torque/Tension calculation provides a simple estimation of the tension in a bolt based on the torque imposed or vice versa. The ...
Bolt check
This sheet , check bolt under shear and tension forces according to CAN/CSA S16-01 and AMAA-TIR-A9-14.Moreover, check bearing cap...
Eccentric Loaded Bolted Joint
Enter bolt locations, applied load and location of load. Calculates bolt shear, tension, etc. I use this all the time at work and it ma...
Bruhn BOLT in combined shear and tension.xls
When bolts are subjected to combined shear and tension loads, their overall strength is determined by considering the inter...
Bolt Stress MIL-HDBK-5
Calculates the allowable pre-load after a user input shear load or the allowable shear load after a user input pre-load for coa...
Connecting Rod Bolts Calculation with VDI 2230 standards
I have calculated the Connecting rod bolt analysis with VDI 2230 standards.I still think I have made so many mistakes.Ple...
Bolt length calculator
Given the clamping thickness, the bolt length would be calculated
Steel Roller Structural Analysis
AMERICAN INSTITUTE OF STEEL CONSTRUCTION, INC. (AISC)
Specification for Structural Steel Buildings
Allowable Stress Design and Plastic Design
...