You have downloaded this file 0 times in the last 24 hours, limit is 100.
Your file downloads total 0 in the last 24 hours, limit is 20.

Pin and Lug.xls
 
This location is for Registered Users Only.
Perhaps you need to login or register.

Description:

Purpose of calculation: Calculate the proof and ultimate strength of obliquely loaded lugs.
This calculation has been extended to also consider fatugue strength.

Calculation Reference: Traditional UK railway method.
Calculation Validation: This calculation requires validation.
Design Tips:
1) It is normal to choose a pin size 6mm larger than required to allow for off centre drilling etc.
2) You may want to consider the use of a replaceable bush to increase the wear life of the lug.
3)You may also have to consider fatigue life.

Calculation Reference
Peterson's Stress Concentration
Juvinal Design

Submitted By:
John Doyle (JohnDoyle[Admin])
Submitted On:
21 Mar 2011
File Size:
132.50 Kb
Downloads:
324
File Version:
1.3
Rating:
Total Votes:6
Comments: 7
JohnDoyle[Admin] 9 years ago
A correction to the shear proof strength and ultimate proof strength formulas has been made after it was reported in by a user.
mansoor ahmed 9 years ago
Thanks.
mansoor ahmed 9 years ago
Thanks.
JohnDoyle[Admin] 9 years ago
Description of Change: An error in the sketch showing dimension b has been corrected. Addition of calculations of the parameter b for round ended and square ended lugs has been added.
jwt 10 years ago
Very nicely layed out. I look forward to using it.
jwt 10 years ago
Very nicely layed out. I look forward to using it.
JohnDoyle[Admin] 10 years ago
Some simple nomenclature errors have been corrected.

We have 191 guests and one member online

Contact Us
post/emailEmail (preferred method of contact)
telephone US +1 617 5008224
telephone EU +44 113 8152220
Our Feeds
Repository RSS. News RSS.