Bolts and Threads
0 ContainersFiles in Bolts and Threads
Bolt length calculator
Given the clamping thickness, the bolt length would be calculated
Bolt spacing and edge distances.xls
Bolt Spacing, Edge and End Distances for Steel Plates Gives the minimum and maximum bolt pitch, edge distance and end distance for a bolted steel p...
Bolt Stress MIL-HDBK-5
Calculates the allowable pre-load after a user input shear load or the allowable shear load after a user input pre-load for coa...
BoltedJoint.xls
Bolted Joint Force Distribution (Simple Version) Shows how a preloaded bolt and the plates it clamps share an external tensile load. From the bolt ...
Connecting Rod Bolts Calculation with VDI 2230 standards
I have calculated the Connecting rod bolt analysis with VDI 2230 standards.I still think I have made so many mistakes.Ple...
Detailed Bolted Joint Calculations
Detailed Bolted Joint Calculation: Preload, Stiffness, Slip, Fatigue and Thermal Effects A full analysis of a preloaded metric bolted joint: preloa...
Eccentric Loaded Bolted Joint
Enter bolt locations, applied load and location of load. Calculates bolt shear, tension, etc. I use this all the time at work and it ma...
Plates straps and rivets.xls
KNOWN: Two plates are joined with straps and a single row of rivets (bolts). Plates, straps and rivets are made of ductile steel with known...
Power screw calculations.xls
KNOWN: A double thread Acme screw and a thrust collar, each with known diameter and running friction coefficient, are used to raise a speci...
Power Screw.xls
Purpose of calculation: For an applied load on a screw thread calculate the axial thrust of a nut. Calculate bolt pretension from screw parameter...
Quick and Dirty Bolt Sizing Calculation.xls
https://www.youtube.com/watch?v=x5G5xPAt5To
The following values are required as inputs to the calculation:
- BOLT GRADE - Enter the two num...
Reaction Force Check 2.0
Spreadsheet is able to find the x,y,z reaction forces of various fixed connections or bolt patterns in 3-dimensions using vecto...
Self-Tapping Screw Connection Check (ASD) - AAMA TIR-A9-14
Self-Tapping Screw Connection Check (ASD) to AAMA TIR-A9-14 An allowable stress design check of a stainless steel self-tapping screw in an aluminiu...
Steel Detailing Guide - Wrench and socket Clearance
Includes details for bolting clearances for below list :OPEN JAW WRENCHESSINGLE ENDED OPEN JAW SLUGGING WRENCHESSOCKET WRENCH A...
Steel Roller Structural Analysis
AMERICAN INSTITUTE OF STEEL CONSTRUCTION, INC. (AISC)
Specification for Structural Steel Buildings
Allowable Stress Design and Plastic Design
...
Thread Stripping.xls
Thread Stripping: Minimum Length of Thread Engagement Checks whether a screw threaded into a tapped hole has enough length of engagement for the sc...









