Civil Engineering
0 ContainersFiles in Civil Engineering
POLEFDN.xls
Pole Foundation Embedment Depth by Five Methods Finds the embedment depth needed for a free-headed, rigid round pier (pole foundation) carrying hor...
RECTANGULAR SPREAD FOOTING ANALYSIS
Rigid Spread Footing Bearing Pressure and Stability (Biaxial Eccentricity) Analyses rigid spread footings carrying one or more piers with vertical ...
GRDSLAB.xls
GRDSLAB – Concrete Slab on Grade Analysis Checks plain concrete slabs on grade, reinforced only for shrinkage and temperature (ACI 360 &ldquo...
DECKSLAB.xls
DECKSLAB – Slab on Metal Deck Analysis and Design Analyses and designs concrete slabs on steel deck, either as composite deck slabs (without ...
PILEGRP.xls
Pile Group Reactions under a Rigid Cap (Elastic Method) Distributes the loads from one or more piers or columns on a rigid pile cap to the piles be...
BUOYANCY ANALYSIS FOR CONCRETE PIT OR TANK
Buoyancy (Flotation) Check for a Rectangular Concrete Pit or Tank Checks whether a rectangular concrete pit or tank will float when empty and the g...
Pole Foundation IBC 2003
Pole foundation design based on IBC 2003. Both Restrained and Unrestrained at top.
Calculation Reference IBC 2003
Reinforced concrete calculation.xls
KNOWN: Reinforced concrete pedestal. Cross Section, 12 steel reinforcing bars. Bar diameters. Allowable stresses of steel and concrete.
FIND...
PUMPFDN - PUMP FOUNDATIONS SUPPORTED ON SOIL
"PUMPFDN" is a spreadsheet program written in MS-Excel for the purpose of analyzing "block-type" foundations for both sma...
Shear Friction ACI 318-02.xls
I'm not much of a spreadsheet writer, but I could find nothing on the subject of shear-friction. This is my first submittal, and I'm sure it won'...
More Retaining Wall Calculations
Let's break down the key components:
Input Parameters:
Soil Properties:
Friction angle (φ) = 30 degrees Cohesion (c) = 0 Soil unit we...
Spread Footing_v1.04.xls
The footings were proportioned so that the bearing pressure does not exceed the safe bearing capacity of the soil. The bending moments ...
Two-Way Slab Design to BS 8110
This spreadsheet performs an analysis and design of two-way spanning reinforced concrete slab. It can be used by both practicing Engine...
DESIGN OF PLATE ELEMENTS_v1.7.xls
A concrete slab is a common structural element of modern buildings. Horizontal slabs of steel reinforced concrete, typically betwee...























