This spreadsheet is a simple aid to designing lugs BS EN 1993-1-8. It assumes that the shackle pin is designed and tested by the lifting gear suppl...

Design of the Isolated Footing.

general engineering description of designing an isolated footing subjected to biaxial bending: ...

A slip-critical connection, as defined by the American Institute of Steel Construction (AISC), is a type of bolted connection where sli...

The calculation of combined tension and shear in a slip-critical connection involves several steps. Here's a general outline of the process...

The bearing strength of a pin in a drilled hole is a critical aspect of many mechanical and structural designs. It's typically governed by ...

The design of a base plate according to the American Institute of Steel Construction (AISC) involves several steps. Here's a general outlin...

Lift Lug Capacity (AISC) Consider Yield Stress, Ultimate Stress, Hole diameter, Pin diameter, Plate thickness, Edge distance, Weld size,...

The program checks jacking bolt size and grade for a given load. Stress checked on 3 threads of the nut (most loaded) and combined stess.

...

Like many others, I discovered through experience that the principal axis section modulus values for angles provided in the 13th Editio...

Design of uniformly loaded simple stair steel stringers. This design is in accordance with the American Institute of Steel Construction (AI...

Design of STEEL-REINFORCED ELASTOMERIC BEARINGS using METHOD A per AASHTO LRFD Bridge Design Specifications, 8th Edition (2017) Section 14.7.6.

...

Structural Engineers can use this spreadsheet to design handrails. It gives the ultimate loads (Moment & Shear) for handrail post connection. It a...

Lintel design